Faulty CE-2 (LED doesn't light up)

Tnsen
Posts: 40
Joined: Sat Jan 08, 2022 12:06 pm

Re: New (broken) pedal day!

Post by Tnsen » Tue Feb 14, 2023 5:47 pm

Ok. I haven`t heard about it before i did see that video. I have an Alesis SR-16 drum machine, I have to press very hard to get things to happen on the pads, can I use the q-tip with contact cleaner there to? I haven`t use it for years. I picked it up the other day to test it, it was unusable because of this.

User avatar
Pepe
Posts: 1671
Joined: Thu Aug 16, 2018 2:19 pm
Location: Germany
SBZ: Multi Platinum
Bossarea: Double Platinum
Contact:

Re: New (broken) pedal day!

Post by Pepe » Tue Feb 14, 2023 7:20 pm

laurie wrote:
Tue Feb 14, 2023 5:26 pm
D6 and R51 (that supply the LED) both look OK visually.
That's what I thought as well.
laurie wrote:
Tue Feb 14, 2023 5:26 pm
@pepe - I wonder if Q8 has failed?
But how would it explain that the LED is working again? Maybe during the cleaning process something (with a cold solder joint?) has been pushed into a correct position again so everything is working again?

But all the solder joints on the back are looking pretty good in this picture. And where do the small crumbles of metal come from? Very strange ...

[Topic splitted]
Pepe at YouTube and Instagram

Tnsen
Posts: 40
Joined: Sat Jan 08, 2022 12:06 pm

Re: Faulty CE-2 (LED doesn't light up)

Post by Tnsen » Tue Feb 14, 2023 9:13 pm

Ok. Have done the meter thing now and when engage the capacitor as I call it Q8 D6 R51 or what the name It have. where the arrow is. It work when it is engage. I can to see tomorrow if I have time to check it out the hole box.

User avatar
laurie
Posts: 1633
Joined: Fri Aug 17, 2018 2:07 am
Location: Canada
SBZ: Multi Platinum
Bossarea: Multi Platinum

Re: Faulty CE-2 (LED doesn't light up)

Post by laurie » Tue Feb 14, 2023 10:18 pm

What I was asking for, was to set your meter to DC voltage, and take a measurement touching the probes on the metal legs at the tip of each arrow.

Do that measurement for the effect engaged, and also for the effect bypassed.

Tnsen
Posts: 40
Joined: Sat Jan 08, 2022 12:06 pm

Re: Faulty CE-2 (LED doesn't light up)

Post by Tnsen » Tue Feb 14, 2023 11:03 pm

I did do that, then the meter did go from 0 up to 414 in DC when it was engage. I`m not so clever in English. sorry.

Tnsen
Posts: 40
Joined: Sat Jan 08, 2022 12:06 pm

Re: Faulty CE-2 (LED doesn't light up)

Post by Tnsen » Wed Feb 15, 2023 9:14 am

Laurie
I have now checked again and the meter is fluctuating between 410 and 414. I checked the others and there are several that give no reading. Some I can't get to and measure directly on the pins (front side), so I have to measure them on the soldering iron (back side).

T

User avatar
laurie
Posts: 1633
Joined: Fri Aug 17, 2018 2:07 am
Location: Canada
SBZ: Multi Platinum
Bossarea: Multi Platinum

Re: Faulty CE-2 (LED doesn't light up)

Post by laurie » Wed Feb 15, 2023 1:08 pm

OK. 4.14V seems OK. I think this tells us a couple of things:
  • The drive circuit for the LED is working.
  • The Zener diode is OK.
  • There is current flowing through the LED.
Based on this, I'd say the LED is failing. If it was on my bench I'd replace the LED and see what happens.

Tnsen
Posts: 40
Joined: Sat Jan 08, 2022 12:06 pm

Re: Faulty CE-2 (LED doesn't light up)

Post by Tnsen » Wed Feb 15, 2023 2:13 pm

I have a distortion pedal from another brand that is gone. I can teach my self solder and take the LED from that pedal as I have learned to solder. I think I will do it like that.
For 30 years ago I did "just" bought a meter for in case. A friend did borrow it and destroyed the meter, I did bought a new one. I did learn to measure a amp tube thats it. Did shift tube yesterday.
Thanks for all the help.I have learn a lot.

T

Post Reply